STRENGTH EQUIPMENT DESIGNED BY STRONGMEN AND BUILT TO LAST.
PLEASE CONTACT FOR ORDERING AND PAYMENT DETAILS - payment will be accepted through UK cheque, UK Postal Order or cash on collection. I work on my computer, so constantly check my emails, and will reply ASAP to any questions.
'CLASSIC' FARMERS WALK
Designed by popular demand, these cylindrical farmers walk implements hark back to the early days of strongman competitions, when the likes of Jon Pall and Capes would run around with empty oxygen cylinders. Ours feature the famous adjustable handles, as seen on the Titan's.
As you can see they are beautifully made, with the usual attention to detail.
Weight: 62.7kg each
The loading bars are solid steel, and can be loaded up to an immense amount of weight.
We can offer the 1" (25.5mm) handles (shown in the pictures), or 33mm handles. Please state which you would prefer when ordering. Also additional handles can be purchased (25.5mm, 33mm or 50mm).
Cost: £300 GBP
Also additional pair of handles can be purchased:
33mm = £29.36
50mm = £31.74
Pick up from the manufacturers, or sent via courier.
THE TRITON BAR
The Triton has been designed for anyone who has difficulty benching due to shoulder problems; rotator cuff problems are rife within the strength training community, and this bar will allow you to bench press without shoulder pain. It will also isolate your triceps far more effectively than standard bench pressing. The handle width is adjustable (approx. 30, 40, 50, 60 and 70cm apart).
Also a useful training tool for log pressing and hammer curling. As usual, a solid piece of equipment with a professional finish.
Weight: 18kg
Approx 140cm from inside collar to inside collar
Approx 39cm loading room on each side Approx 220cm full length of bar
We can offer the 1" (25.5mm) handles (shown in the pictures), or 33mm handles. Please state which you would prefer when ordering. Also additional handles can be purchased (25.5mm or 33mm), incase you require another set to use instead of changing the handles, or for your spotters to hand off the weight.
Cost: £167.99 GBP.
Additional pair of handles can be purchased:
1" (25.5mm) or 33mm = £12 a pair
Pick up from the manufacturers, or sent via courier.
The All-in-One Adjustable Frame Carry, Farmers & Duck Walk
We offer an incredibly strong, multi purpose item. This mega Frame Carry morphs into a Duck Walk and then to a pair of Farmers simply by adjusting a few hand-turn bolts. Not only this, but the handles can also be raised or lowered to what ever height you require. This feature enables you to train for proficiency on any height of equipment. (See photos of the second and final prototype below; the finished item will be professionally painted and with stickers on.) Our other painted prototypes have been seen by strongmen and highly praised.
The loading bars are solid steel, and can be loaded up to an immense amount of weight.
We can now offer the 1" (25.5mm) handles, or 33mm handles. Please state which you would prefer when ordering. Also additional handles can be purchased (25.5mm, 33mm and 50mm).
Weight of the Titan's Tank empty = 91.6k
Each Farmers Walk bars empty = 43.2k
Duck Walk Handle = 2.5k
Here's a picture of our first Titan's customer Dale Norris (05 and 06 Wales Strongest Man, and 05 and 06 4th in UK's Strongest Man) walking with 340k - Plenty of room for more weight, and can you tell he's enjoying it?!
The Titan's Tank made its competition debut at the Severn Valley Novice Strongman Contest and Britain's Strongest Woman 2008. Photographs above show a total weight 255kg. Photos used with the permission of The Whey Consortium/Steve Gardener.
Cost: Complete Kit is £310.17 GBP.
Or if you wish..
1 x Frame Lift ( 2 Farmers and cross members) = £276
Pair of Farmers only = £254.40
Duck Walk handle only = £36
Duck Walk and 1 x Farmers = £162.61
Also additional pair of handles can be purchased:
33mm = £29.36
50mm = £31.74
Pick up from the manufacturers, or sent via courier.
AXLE
Solid bar pictured with tyres on; hollow bar in the foreground (tyres not included).
2 metre long Solid Bar, with inside collars.
Cost: £142.80
2 metre long Hollow Bar, with inside collars.
Cost: £79.20
Pick up from the manufacturers, or sent via courier.
YOKE STRENGTH UNIT
The All-in-One Adjustable Strength Unit
This is not just a Yoke, that will just be brought out for one exercise, but a super strong strength station that can be kept assembled for an array of functional exercises. We use the apparatus for the Yoke, Conan's Walk, Squats (Front and back), Safe Press, Loading items over the bar, High Deadlift and Chins with either the 3" Yoke bar or a standard 1" bar that you can buy seperately. It's ideal if you train on your own as no spotters are needed for the majority of these exercises.
There are two Yoke heights, a tall one (shown in the photo) which is useful if you want to use the unit for a chinning bar, and another at 6 foot high. As you can see in the photos the use of Palmgrips which make it easy to change and to tighten. The bottom photo shows the Chin attachment.
The Yoke Strength Unit made its competition debut at the Northern Qualifier of England's Strongest Man u-105k Contest 2009. Video above shows a total weight of 300kg on each Yoke.
Cost: High Yoke £303.14 GBP
Cost: 6 foot high Yoke £278.62 GBP.
Chin Attachment = £49.33 GBP
Pick up from the manufacturers, or sent via courier.
STRONGMAN LOGS
Four sizes available
Pictured below (bottom pic) is the Training Log. Also available in 8", 10" and 12" widths. The features that you see in the Training Log are the same as those in the bigger ones - handle holes are capped on both sides for extra strength and aesthetic appearance (see pics). The loading bars can be manufactured to accept either 1" or 2" (Olympic) discs.
Measurements of all logs is as follows: End to end of log = 48" Full length = 70" Handle to handle = 24"
Above you can see three 12" logs alongside a trainer log.
Cost:
Trainer Log with 1" loading ends = £131.40 GBP
Trainer Log with 2" loading ends = £143.40 GBP
8" Log with 1" loading ends = £155.40 GBP
8" Log with 2" loading ends = £167.39 GBP
10" Log with 1" loading ends = £257.97 GBP
10" Log with 2" loading ends = £269.74 GBP
12" Log with 1" loading ends = £341.96 GBP
12" Log with 2" loading ends = £353.97 GBP
Pick up from the manufacturers, or sent via courier.
SLED
This a very versitile piece of apparatus, excellent for strongman and anyone interested in strength endurance and fitness training. It has 2 welded uprights for stacking discs onto the sled, and you can also load it with sandbags or barrels as we usually do. You can attach any kind of rope to the front with a carabiner. It features a sloped sled front and this makes it possible to use on the grass as well as concrete or tarmac. In fact, we usually use our sled on grass it really intensifies the exercise. Pulling to the front, rear, tug of war style, or arm over arm can all be done with this sled. Rope and carabiners not included. Can be made with 1" uprights if you require it for use with standard discs.
Sled weight empty = 16.4k
Cost: £69.62 GBP.
Pick up from the manufacturers, or sent via courier.
NEW PRODUCT!
POWER RACK
Constructed from 50mm square box section with 3mm walls; very strong and sturdy. 36 positions. Holes 2" apart. Width and height are can be made to custom dimensions (good for gyms with limited head-room or if you are tall/small and need a different size). 4 fixing points on base so you can bolt it to the floor if necessary.
Dimensions of rack pictured: Height 2130mm; Width 1115mm; Depth of rack 992mm; Depth of base 1305mm (Please note that these are external/maximum measurements. When requesting custom sizes please supply external/maximum measurements required.)
Cost: £400 GBP
Pick up from the manufacturers, or sent via courier.
We are the suppliers of strongman/strength equipment to hundreds of home gyms, and professional gyms such as:
AMEC Gym, Knutsford, Cheshire. Monster Gym, Cheshunt, Waltham Cross, Herts.
Pitreavie Athletics Centre, Dunfermline.
RAC Gym, The Royal Agricultural College, Cirencester, Glos.
Reflexions Gym, Dartford, Kent.
Zeus Gym, St Leonards on Sea, East Sussex.
This is not mass produced equipment made in China, but bomb-proof innovative equipment built by a proper fabrication company. Please check here for their normal stuff they build. Wow! you say, they build some large items. Yes they do, and this is why the grippers have been received so well - 'bomb-proof', 'hardcore' and 'innovative' are some of the words mentioned. When items are manufactured and assembled in such a hands-on way it takes time, and time is money. Hopefully you will still find our prices competitive. There will be some very interesting designs and apparatus being offered, and when the strongman/strength community see and try this equipment I'm sure they will love it. Everything from Yokes to Farmers, Sleds to Duck Walks will be produced, but all designed differently, and with all the useful extras you'd want. We will also be able to make bespoke items to your exact criteria in the future when we're up and running.
